Product Detail
Y Post / Star Picket
Hot-dipped galvanized or black-painted Y posts (star pickets) for fast, sturdy fence installation. A reliable fencing post — built tough, shipped direct.
At a glance
- ✓Q235 steel Y posts (star pickets) for farm and rural fencing
- ✓Profiles: Plain / Scalloped / Studded
- ✓Lengths 1.5 to 2.4 m; custom on request
- ✓Hot-dip galvanized (AS/NZS 4680), black bitumen or painted
- ✓Multiple zinc weights; galvanize to your local standard
- ✓FOB Tianjin · trial order accepted
Specifications
Technical Data Sheet
| Parameter | Value |
|---|---|
| Material | Q235 steel |
| Profiles | Plain / Scalloped / Studded (standard) |
| Weight (kg/m) | ~1.86 kg/m average (varies by length & profile) |
| Coating | Hot-dip galvanized — 390 g/m² standard; black bitumen / painted on request |
| Length | 0.60 – 2.40 m standard; custom available |
| Packing | Plastic film + pallet / bundle |
Section weights vary by length & profile — see stock sizes below.
Standard Stock Range
Common Star Picket Sizes
Hot-dip galvanized, 390 g/m². Weights are approximate and vary by specification.
| Length | Approx. Weight / piece | Coating |
|---|---|---|
| 0.60 m | ~1.12 kg | HDG 390 g/m² |
| 0.90 m | ~1.67 kg | HDG 390 g/m² |
| 1.35 m | ~2.51 kg | HDG 390 g/m² |
| 1.65 m | ~3.07 kg | HDG 390 g/m² |
| 1.80 m | ~3.35 kg | HDG 390 g/m² |
| 2.10 m | ~3.91 kg | HDG 390 g/m² |
| 2.40 m | ~4.46 kg | HDG 390 g/m² |
Custom lengths available on request. Weight depends on the exact specification.
Factory Pricing
FOB Tianjin — from Prices
Prices below are starting points, FOB Tianjin. The final unit price depends on your specification, coating grade and quantity.
Star Pickets
from $2.00
Starting price for the smallest stock length; larger sizes, higher zinc grades and other profiles are quoted on request.
Prices are indicative and subject to market change — request a current quotation for your specification.
Quality Assurance
Testing & Inspection Data
Every lot is checked for weight tolerance, zinc coating, straightness and point sharpness. Confirm your required coating and profile in your inquiry and we will quote and produce to match.
40–230
g/m² Zinc Coating
Hot-dip galvanized regular / heavy grades
±3%
Weight Tolerance
Scale check per bundle
≥380
MPa Tensile Strength
Tensile test per heat number
Your Spec
Galvanizing Standard
Available to your local specifications on request
Product Range
Types of Y Posts
Three profiles to match different terrain, wire types and livestock. All made from Q235 steel, available in galvanised, bitumen or painted finish.
Type 01
Studded Star Post
Studded Star Post
Raised studs/nibs along the flange provide anti-slip wire grip. Closest to standard star picket profile — the premium choice for farms worldwide.
- Anti-slip anchor studs
- Best for standard fencing
Studded star picket weights supplied on request.
Type 02
Plain Y-Post
Plain Y-Post
Flat edge with no anti-slip structure. The economy workhorse for flat-terrain line posts — easy to drive, easy to pull, easy on the budget.
- Flat edge, no anti-slip
- Flat-terrain line post mainstay
Type 03
Scalloped Y-Post
Scalloped Y-Post
Wave/scalloped edge catches wire in the curve, better retention on slopes and with heavy livestock. The grip upgrade when terrain gets tough.
- Wave edge for wire retention
- Slopes & heavy livestock
Applications
Where It Works
Farm & Rural Fencing
The standard line post for field fence and wire fencing across farms worldwide. Drives in fast with a post driver, holds tight for decades.
Temporary & Construction
Quick-install posts for temporary fencing on construction sites, events and road works. Pull out and reuse when done.
Vineyards & Orchards
Clean, low-profile support for vine training wires and orchard netting. Galvanized finish resists corrosion in humid conditions.
Installation Guide
How to Install Y Posts
Mark the Fence Line
Run a string line between end posts. Mark Y post positions at 2–4 m intervals depending on fence type and terrain.
Drive the Post
Use a manual post driver or hydraulic driver. Drive vertically to a depth of 500–600 mm. The pointed tip penetrates hard ground easily.
Attach Wire / Mesh
Use the pre-punched nail holes (if provided) or clip wire through the Y-flange to secure field fence, wire or mesh at each line wire.
Check Alignment
After all posts are in, check alignment with the string line. Adjust any posts that have shifted during driving. Tension the wire evenly.
Pro Tip
On rocky or very hard ground, pre-drill a pilot hole with a steel rod slightly smaller than the post width. This prevents the Y post from bending at the tip during driving.
Matching Accessories
Recommended for a Complete Setup
Y posts are the backbone — pair them with the right mesh and wire for a fence that lasts.
Field Fence / Hinge Joint
High-tensile hinge-joint field fence — the most common pairing with Y posts for cattle and sheep fencing.
View Field Fence →Chain Link Fence
Diamond mesh chain link for security and boundary fencing — attach to Y posts with wire ties or clamps.
View Chain Link →Barbed Wire & Staples
Add a barbed wire topper for livestock deterrence. Galvanized staples for fixing wire to timber posts.
View Barbed Wire →Reference Price
Factory Direct — Ex Works
Prices shown are indicative reference prices only and are not the final transaction prices. Actual pricing is subject to change based on raw material costs, international market conditions, exchange rate fluctuations, shipping and freight costs, order quantity, product specifications, and packaging and delivery requirements.
Submit an inquiry and our sales team will calculate a tailored quote for you; the final price will be confirmed in our official quotation only.
Buying Guides
Read Before You Buy
Practical guides from our factory floor to help you spec the right fence.
Best Fence for Cattle, Sheep & Deer
Match mesh, height and knot type to the animal you are fencing in your local conditions.
Read guide → StandardsZinc Coating Guide
How much zinc your fence needs, and why the coating — not the steel — decides how long it lasts.
Read guide → ImportingImporting Wire Fence from China
MOQ, lead time, payment terms and how to verify a real factory before you pay.
Read guide →Buying Guides
Read Before You Buy
Practical guides from our factory floor to help you spec the right fence.
Y Post Profiles Explained
Plain vs scalloped vs studded — which grip type suits your terrain and stock.
Read guide → Regional GuideAU & NZ Farm Fencing
AS/NZS 4680 star pickets and how they are specified in Australia and New Zealand.
Read guide → GuideFence Installation Guide
Posts, spacing and tensioning fundamentals for a straight, long-lasting fence line.
Read guide →FAQ
Frequently Asked Questions
Request a Quote
Tell us your specs, quantity and destination — we reply within 24 hours.
💡 The final landed price includes freight, duties & handling. We'll calculate it for you.
Thank You for Your Inquiry!
We've received your message and our sales team will get back to you within 24 hours with a detailed quote.
If urgent, reach us directly via WhatsApp.
📋 What happens next:
- 1. Our team reviews your requirements within 24 hours.
- 2. We'll email you a complete quote with product specs & freight.
- 3. Once confirmed, we send free samples and proforma invoice.
Get Factory-Direct Pricing
Tell us what you need — we reply within 24 hours with a quote and samples.
📋 What you'll get:
- • Product reference price
- • Estimated freight to your port
- • Recommended specs for your use
- • Lead time & packing details
-
WhatsApp
+86 188 3280 8956 -
Factory Address
100m North of Diwo Village, Anping County
Hengshui City, Hebei Province, China 053600